电机引线/电机星点线/电机端子线焊接方法，怎么焊？用什么方法？什么原理？

LN-RRJ系列热熔焊接机焊接电机引线/电机星点线/电机端子线焊接工艺详解 Process description

LN-RRJ系列热熔焊接机

漆包线和铜管/铜端子/铜鼻子热熔压接 Terminal Fusing/ Tube Fusing / Hot-Crimping

原理说明Principle description

大电流通过电极及铜端子，产生足够的电阻热传导到铜端子上，利用这个热量以及加压力进行压接。是利用电阻热能保证首先剥离导线（漆包线）的镀层，然后依靠端子的夹力来确保结合强度的热压工艺手段。这里需要强调的是，热压接并不是焊接，而是热压接这一概念。

A large current passes through the electrode and the copper terminal, generating enough electrical resistance heat conduction to the copper terminal, and using this heat and pressure to conduct compression.Is the use of resistance heat to ensure that the first stripping wire (enameled wire) coating, and then rely on the terminal clamping force to ensure the bonding strength of the hot-pressing process.It should be emphasized that hot pressing is not welding, but the concept of hot pressing.

过程步骤 Process steps

1、最初的热量将电磁线（漆包线）的漆皮气化；

2、进一步的加热，漆皮气化后，为铜线和铜线连接在一起提供条件；

3、最后，进一步的加热和施加压力，洁净后的铜线互相热量传递扩散。不仅仅是铜线连接在一起，铜线还和端子也连接在一起。

4、在通电断开后，压力需要继续保持，避免铜线连接松开。

5、通过此种熔接方法形成的连接，拉力强大和耐用，并且几乎“零空气电阻”的连接。

1. The initial heat gasifies the patent leather of the electromagnetic wire (enameled wire);

2. Further heating and gasification of the patent leather will provide conditions for the connection of copper wire and copper wire;

3. Finally, further heating and pressure are applied, and the cleaned copper wires transfer heat to and from each other.Not only are the copper wires connected, but the copper wires are also connected to the terminals.

4. After power disconnection, the pressure should be maintained to prevent the copper wire connection from loosening.

5. The connection formed by this welding method is strong and durable, and has almost "zero air resistance".